Anker PowerCore III 10K Wireless 10W Black
The 18W USB-C port is equipped with our exclusive PowerIQ 3.0 technology to offer high-speed charging to a wide range of mobile devices. Compatible with Power Delivery and Quick Charge technology.
On-The-Go Wireless Charging
Place your phone, earbuds, or other Qi device on the center of the pad to get a convenient wireless charge anywhere.
PowerCore III 10K Wireless
The Freedom to Charge Anywhere
Wireless Charging. Anywhere.
The convenience of wireless charging is no longer confined to your home or office. Qi-certified charging up to 10W lets you fully charge an iPhone 11 in less than 4 hours no matter where you are.
With wireless, USB, and USB-C charging all available, PowerCore gives you unprecedented choice over how you charge. You can even use all of them at once to charge 3 devices simultaneously.
The 18W USB-C port offers the kind of charging speeds that you normally only find in a wall charger. Charge an iPhone 11 to 50% in 30 minutes or fully charge a Galaxy S20 in less than 2 hours.
PowerCore is equipped with a 10,000mAh cell capacity to keep your devices charged for at least a full day. Charge an iPhone 11 or Pixel 4 more than twice, or charge a Galaxy S20 over 1.5 times.
Qi-certification offers flawless wireless charging with compatible devices, while our exclusive PowerIQ 3.0 technology ensures optimized charging to virtually any mobile device including phones, tablets, and more.
Slide-out the built-in phone stand to watch videos while charging. Note: Only wired charging can be accessed while using the phone stand.
Connect an 18W charger (not included) to the USB-C port to fully recharge the internal battery in just 4.5 hours.
This wireless charger does not feature MagSafe-style magnetic alignment, and therefore is not able to charge the iPhone 12 series magnetically.
The wireless charging feature does not work with the Apple Watch series or Samsung Watch series.
Do not use a 5W charger to charge your phone wirelessly and recharge PowerCore simultaneously. To charge simultaneously at full speed, it’s recommended to use a charger with at least an 18W output.
Phone cases thicker than 5 mm, magnetic attachments, metal attachments, stands, or credit cards will interfere with wireless charging.
Place your phone on the center of the wireless pad to ensure stable charging. If your phone does not show as charging, adjust the position of your phone.
Press the power button to activate wireless charging.
10,000 mAh is the total of the nominal rated capacity of internal battery cells.
Advanced Charging Technology
The 18W USB-C port is equipped with our exclusive PowerIQ 3.0 technology to offer high-speed charging to a wide range of mobile devices. Compatible with Power Delivery and Quick Charge technology.
Connect PowerCore to an 18W charger to simultaneously charge your phone wirelessly while recharging PowerCore’s battery. And when you need to go, just unplug PowerCore to give your phone a portable wireless charge.
Superior Safety
Our MultiProtect safety system combines foreign-object detection, short-circuit protection, temperature control, and more so you can charge your devices with total peace of mind.
On-The-Go Wireless Charging
Place your phone, earbuds, or other Qi device on the center of the pad to get a convenient wireless charge anywhere.
PowerCore III 10K Wireless
The Freedom to Charge Anywhere
Wireless Charging. Anywhere.
The convenience of wireless charging is no longer confined to your home or office. 10W max charging lets you fully charge an iPhone 11 in less than 4 hours no matter where you are.
With wireless, USB, and USB-C charging all available, PowerCore gives you unprecedented choice over how you charge. You can even use all of them at once to charge 3 devices simultaneously.
The 18W USB-C port offers the kind of charging speeds that you normally only find in a wall charger. Charge an iPhone 11 to 50% in 30 minutes or fully charge a Galaxy S20 in less than 2 hours.
PowerCore is equipped with a 10,000mAh capacity to keep your devices charged for at least a full day. Charge an iPhone 11 or Pixel 4 more than twice, or charge a Galaxy S20 over 1.5 times.
Wireless charging is designed to work with Qi-compatible devices, while our exclusive PowerIQ 3.0 technology ensures optimized charging to virtually any mobile device including phones, tablets, and more.
Slide out the built-in phone stand to watch videos while charging. Note: Only wired charging can be accessed while using the phone stand.
Connect an 18W charger (not included) to the USB-C port to fully recharge the internal battery in just 4.5 hours.
- This wireless charger does not feature MagSafe-style magnetic alignment, and therefore is not able to charge the iPhone 13 or 12 series magnetically.
- The wireless charging feature does not work with the Apple Watch series or Samsung Watch series.
- Do not use a 5W charger to charge your phone wirelessly and recharge PowerCore simultaneously. To charge simultaneously at full speed, it’s recommended to use a charger with at least an 18W output.
- Phone cases thicker than 5 mm, magnetic attachments, metal attachments, stands, or credit cards will interfere with wireless charging.
- Place your phone on the center of the wireless pad to ensure stable charging. If your phone does not show as charging, adjust the position of your phone.
- Press the power button to activate wireless charging.
- USB-C wall charger sold separately.
- 10,000 mAh is the total nominal rated capacity of the internal battery cells.
ANKER PowerCore III 10K WIreless User Manual
Home » Anker » ANKER PowerCore III 10K WIreless User Manual
USER MANUAL
PowerCore III 10K Wireless
Charging Your Phone or Tablet Using Charging Cables
Charging Your Phone or Tablet Wirelessly
1 To activate the wireless charging function, press the power button. The wireless charging indicator will breathe blue.
2 For optimal charging performance, align your smartphone with the coil on the center of the charger. If no charging icon shows on your smartphone, adjust the way you place your phone. Make sure it is always placed on the center of the charger.
You cannot charge your device wirelessly in these scenarios:
o using a case with a magnetic / iron plateo using a case with a pop socketo using an ultra-thick ( 5 mm) protective phone case
- Do not use an adapter with an output of 5V/1A (5W) or less.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
- Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Charging Devices Wirelessly and Using Cables Simultaneously
USB-C
Charging Your Smart Watches or Bluetooth Earphones
USB-C 2
- Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
- Charge your Smart watch, Bluetooth earphones, or other low-power accessories.
- Exit “trickle-charging” mode: Press the power button once again.
Recharging Your Portable Charger
When your PowerCore exceeds the temperature limit, the battery level indicator will turn off. Let PowerCore cool down before use.
LED Indicator Guide
Specifications
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 40°C / 14°F to 104°F.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge once every three months.
- When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1617 is in compliance with Directives 2014/53/EU, 2014/30/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
Anker Innovations LimitedRoom 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
CE POCName: Anker Innovations Deutschland GmbHAddress: Georg-Muche-Straße 3-5, 80807 München
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.(2) Increase the separation between the equipment and receiver.(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.(4) Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator your body.
The following importer is the responsible party.company Name: Fantasia Trading LLCAddress: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licenseICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS‐216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
Customer Service
18-Month Limited Warranty
Lifetime Technical Support
support@anker.com
(US) 1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)(UK) 44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)(DE) 49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00( ) 03 4355 7823 – 9:00 – 17:00( ) 86 400 0550 036 9:00 – 17:30
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Charge Fast, Live
For FAQs and more information, please visit:
Model: A161751005002349 V02
Anker PowerCore III Sense 10K Wireless.Black Fabric
The 18W USB-C port is equipped with our exclusive PowerIQ 3.0 technology to offer high-speed charging to a wide range of mobile devices. Compatible with Power Delivery and Quick Charge technology.
On-The-Go Wireless Charging
Place your phone, earbuds, or other Qi device on the center of the pad to get a convenient wireless charge anywhere.
PowerCore III 10K Wireless
The Freedom to Charge Anywhere
Wireless Charging. Anywhere.
The convenience of wireless charging is no longer confined to your home or office. Qi-certified charging up to 10W lets you fully charge an iPhone 11 in less than 4 hours no matter where you are.
With wireless, USB, and USB-C charging all available, PowerCore gives you unprecedented choice over how you charge. You can even use all of them at once to charge 3 devices simultaneously.
The 18W USB-C port offers the kind of charging speeds that you normally only find in a wall charger. Charge an iPhone 11 to 50% in 30 minutes or fully charge a Galaxy S20 in less than 2 hours.
PowerCore is equipped with a 10,000mAh cell capacity to keep your devices charged for at least a full day. Charge an iPhone 11 or Pixel 4 more than twice, or charge a Galaxy S20 over 1.5 times.
Qi-certification offers flawless wireless charging with compatible devices, while our exclusive PowerIQ 3.0 technology ensures optimized charging to virtually any mobile device including phones, tablets, and more.
Slide-out the built-in phone stand to watch videos while charging. Note: Only wired charging can be accessed while using the phone stand.
Connect an 18W charger (not included) to the USB-C port to fully recharge the internal battery in just 4.5 hours.
- This wireless charger does not feature MagSafe-style magnetic alignment, and therefore is not able to charge the iPhone 12 series magnetically.
- The wireless charging feature does not work with the Apple Watch series or Samsung Watch series.
- Do not use a 5W charger to charge your phone wirelessly and recharge PowerCore simultaneously. To charge simultaneously at full speed, it’s recommended to use a charger with at least an 18W output.
- Phone cases thicker than 5 mm, magnetic attachments, metal attachments, stands, or credit cards will interfere with wireless charging.
- Place your phone on the center of the wireless pad to ensure stable charging. If your phone does not show as charging, adjust the position of your phone.
- Press the power button to activate wireless charging.
- 10,000 mAh is the total of the nominal rated capacity of internal battery cells.
Refund Policy
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at hello@the1kw.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at hello@the1kw.com.
Damages and issues Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Gifts If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
Unboxing
In the PowerCore III Sense 10K box, you will find the following:
- PowerCore III Sense 10K power bank
- Anker USB-A to USB-C cable
- Pouch
- User manual
In the PowerCore III 10K Wireless box, you will find the following:
- PowerCore III 10K Wireless power bank
- Anker USB-A to USB-C cable
- Pouch
- User manual
Design and build quality
The PowerCore III Sense 10K power bank has a fabric-like finish on the top and a smooth matte plastic on the back. There are 4 different colours you can choose from – Sun-kissed Coral, Steel Blue, Winter Sage, and Venetian Red. The unit I have is the Steel Blue colour variant.
The PowerCore III 10K Wireless power bank has a textured finish on the top with an anti-rubber rubber ring to keep phones steady when charging wirelessly. The back has a smooth matte finish which seems to pick up fingerprints more easily than the PowerCore III Sense 10K.
One interesting design aspect about the PowerCore III 10K Wireless is that is has a hook like thing at the corner of the power bank. That hook like thing is actually a phone stand which you can prop your phone up at 70º – 80º angle. You can charge your phone while charging if you set the phone in landscape mode.
Comparing both power banks, they are about the same size – height is about the same as an iPhone 11. The PowerCore III 10K Wireless is slightly thicker. With regards to build quality, both power banks feel really well built and the buttons are all responsive and tactile.
Both power banks also come with pouches in the packaging. The pouch that comes with the PowerCore III 10K Wireless is made of a stretchy mesh-like material, while the one that comes with the PowerCore III Sense 10K is a smooth silk-like fabric.
Tech specs
Both the PowerCore III 10K Wireless and PowerCore III Sense 10K are rather similar, only that the PowerCore III 10K Wireless is capable of Qi-wireless charging. Both have a single USB-A and USB-C port. The USB-C port is capable of delivering 18W of power and has Anker’s proprietary PowerIQ 3.0 technology which offers high-speed charging to a wide range of mobile devices. The USB-A port on the other hand, supports charging speeds of up to 12W.
For the PowerCore III 10K Wireless, the wireless charging speed is up to 10W. Both power banks is able to be fully charged via the USB-C port in just 4.5 hours if you use at least a 18W power adapter such as the Anker PowerPort III Nano.
Conclusion
It’s hard not to like the Anker PowerCore III Sense 10K Wireless and PowerCore III 10K Wireless. They have great build quality, exude a premium design, and have trusted charging technologies so that you can feel safe charging your phone without worrying about any battery health impacts.
Currently, only the PowerCore III Sense 10K is available for purchase in Singapore and it retails for S69.90. It is quite expensive for a 10,000mAh power bank, but Anker do offer a 18-month warranty period which should sweeten the deal.