Balmar Battery Monitor Kit, 12V-48V, wGateway, No Display
Help other Outback Marine Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.
Same Day Dispatch (Order by 1PM)
Authorised Victron Repair Centre
SIGNUP and SAVE!Join the CLUB for news and special member-only pricing, promotions and offers. It’s FREE to Join
© 2023 Outback Marine Australia Pty Ltd. ABN: 26082231892. All rights reserved.
Terms Conditions
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Outback Marine Australia Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Outback Marine Australia Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is. Our ABN is 26082231892. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
- The content of the pages of this website is for your general information and use only. It is subject to change without notice.
- Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
- Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
- This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
- All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
- Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
- From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
- Your use of this website and any dispute arising out of such use of the website is subject to the laws of Queensland Australia.
Privacy Policy
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
- name and job title
- contact information including email address
- demographic information such as postcode, preferences and interests
- other information relevant to customer surveys and/or offers
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
- Internal record keeping.
- We may use the information to improve our products and services.
- We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.
- From time to time, we may also use your information to contact you for market research purposes. We may contact you by email, phone, fax or mail. We may use the information to customise the website according to your interests.
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer’s hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system. Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us. You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
- whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
- if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by writing to or emailing us.
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
v battery monitor
Earn 1 point for every 1 you spend, plus, earn points for referring friends, writing reviews and get exclusive offers. Lots more benefits and receive a code for 10% off your next order.
Roll over image to zoom in Click on image to zoom
Description
Enerdrive ePRO-HV Battery Monitor, 5 Year Warranty Accurately read your battery bank like a fuel gauge with Enerdrive battery monitors.
Defining the amount of energy available in a battery is a complex task. There are many things to consider to accurately monitor the state of your batteries; battery age, discharge current and temperature all influence the actual battery capacity. Enerdrive Battery Monitors use high performance measuring circuits, along with complex software algorithms to display the exact state of the remaining battery capacity.
Using a clear back lit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery. The ePRO and ePRO-HV battery monitors are equipped with an internal programmable alarm relay, to start a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.
SPECIFICATIONS
| Product Name | Enerdrive ePRO-HV Battery Monitor, 5 Year Warranty |
| SKU | EN55040 |
| Brands | Enerdrive |
| Product Category | Batteries Other |
| Product Type | ePRO Battery Monitor. 12v to 24v range battery monitor including 500amp shunt. |
| Model | EN55040 |
| Dimension | 6.4 x 5.2 x 7.9 cm |
| Weight | 95 grams |
| Manufacturers Warranty | 5 Years |
WARRANTY
5-year warranty. Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.
LiFePO4 Battery Voltage Charts (12V, 24V 48V)
Just so you know, this page contains affiliate links. If you make a purchase after clicking on one, at no extra cost to you I may earn a small commission.
Here are lithium iron phosphate (LiFePO4) battery voltage charts showing state of charge based on voltage for 12V, 24V and 48V LiFePO4 batteries — as well as 3.2V LiFePO4 cells.
Note: The numbers in these charts are all based on the open circuit voltage (Voc) of a single battery at rest. If your LFP battery manual has its own discharge curve and charging parameters, they should take precedence over the ones below.
V LiFePO4 Battery Voltage Chart
| 14.6V | 100% (charging) |
| 13.6V | 100% (resting) |
| 13.4V | 99% |
| 13.3V | 90% |
| 13.2V | 70% |
| 13.1V | 40% |
| 13.0V | 30% |
| 12.9V | 20% |
| 12.8V | 17% |
| 12.5V | 14% |
| 12.0V | 9% |
| 10.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
12V 100Ah LiFePO4 batteries are currently some of the most popular for off-grid solar power systems. They’re a drop-in replacement for 12V lead acid batteries, and a great upgrade.
They are fully charged at 14.6 volts and fully discharged at 10 volts. They are made by wiring four 3.2V LiFePO4 cells in series.
12V LiFePO4 Battery Charging Parameters
- Charging voltage: 14.2-14.6V
- Float voltage: 13.6V (or disabled)
- Maximum voltage: 14.6V
- Minimum voltage: 10V
- Nominal voltage: 12V or 12.8V
V LiFePO4 Battery Voltage Chart
| 29.2V | 100% (charging) |
| 27.2V | 100% (resting) |
| 26.8V | 99% |
| 26.6V | 90% |
| 26.4V | 70% |
| 26.2V | 40% |
| 26.0V | 30% |
| 25.8V | 20% |
| 25.6V | 17% |
| 25.0V | 14% |
| 24.0V | 9% |
| 20.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
24V lithium iron phosphate batteries are another popular option for DIY solar power projects. You can either buy a 24V LiFePO4 battery off the shelf, or get two identical 12V LiFePO4 batteries and connect them in series to make a 24V battery bank.
They are fully charged at 29.2 volts and fully discharged at 20 volts. They are made by connecting eight 3.2V LiFePO4 cells in series.
24V LiFePO4 Battery Charging Parameters
- Charging voltage: 28.4-29.2V
- Float voltage: 27.2V (or disabled)
- Maximum voltage: 29.2V
- Minimum voltage: 20V
- Nominal voltage: 24V or 25.6V
V LiFePO4 Battery Voltage Chart
| 58.4V | 100% (charging) |
| 54.4V | 100% (resting) |
| 53.6V | 99% |
| 53.2V | 90% |
| 52.8V | 70% |
| 52.4V | 40% |
| 52.0V | 30% |
| 51.6V | 20% |
| 51.2V | 17% |
| 50.0V | 14% |
| 48.0V | 9% |
| 40.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
48V batteries are more popular for larger solar systems. They rarely make sense for small-scale projects. Designing a higher voltage solar system allows you to keep amperage low, thereby saving you money on wiring and equipment costs.
48V LiFePO4 batteries are fully charged at 58.4 volts and fully discharged at 40 volts. They are made by connecting 16 3.2V LiFePO4 cells in series.
48V LiFePO4 Battery Charging Parameters
- Charging voltage: 56.8-58.4V
- Float voltage: 54.4V (or disabled)
- Maximum voltage: 58.4V
- Minimum voltage: 40V
- Nominal voltage: 48V or 51.2V
.2V LiFePO4 Cell Voltage Chart
Here’s a printable version of the above chart:
And here it is graphed out:
Individual LiFePO4 cells have a nominal voltage of 3.2 volts. They are fully charged at 3.65 volts and fully discharged at 2.5 volts.
You can buy individual LiFePO4 battery cells online. They’re best used for making your own lithium batteries. You can wire cells in series and parallel to make LFP batteries with your desired voltage and capacity combinations.
3.2V LiFePO4 Cell Charging Parameters
- Charging voltage: 3.55-3.65V
- Float voltage: 3.4V (or disabled)
- Maximum voltage: 3.65V
- Minimum voltage: 2.5V
- Nominal voltage: 3.2V
Ways to Check LiFePO4 Battery Capacity
Measure Battery Open Circuit Voltage with a Multimeter
Pros: Moderately accurate
Cons: Must disconnect all loads and chargers and let battery rest
A battery’s voltage changes depending on its charge and discharge rate. Plus, LiFePO4 batteries have a relatively flat discharge curve from around 99% to 20% capacity. Because of these factors, it can be hard to estimate their state of charge from voltage alone.
To get an even somewhat accurate estimate of LiFePO4 battery capacity based on voltage, you first need to disconnect any loads and chargers from the battery. (Don’t forget to disconnect your solar panels from your charge controller first!)
Let the battery rest for a little while — I usually wait 15-30 minutes — and then measure its open circuit voltage with a multimeter.
Compare your measurement to the right voltage curve above, or the state of charge chart in your battery manual. Use it to get a rough estimate of your battery’s remaining capacity.
For example, I own the Ampere Time 12V 100Ah LiFePO4 Deep Cycle Battery (Ampere Time has since rebranded to “LiTime”). I wanted to check its capacity after having stored it for a few weeks. I brought it out of storage and measured its voltage with a multimeter. I got 13.23 volts.
I then compared this number to the 12V LiFePO4 state of charge chart above, as well as the one in the battery manual.
Based on the charts, I’d estimate my battery’s state of charge was somewhere around 80%.
I like this method best for estimating the state of charge of an LFP battery I’ve just received or just pulled out of storage. The battery is already at rest and not connected to anything. I find it too inconvenient to disconnect everything once the battery is in use.
DIY lithium battery builders will also measure the voltage of used (and new) battery cells — such as LFP cells and 18650 lithium batteries — to see which are good and which are duds.
Use a Battery Monitor
Pros: Most accurate, convenient
Cons: Good battery monitors are expensive
The best way to track battery capacity is to connect a good battery monitor — such as the Victron SmartShunt or Victron BMV-712.
Battery monitors track the amount of amp hours consumed to accurately estimate the state of charge. They also display useful system specs such as battery voltage and current. Some connect via Bluetooth to your phone so you can check your LiFePO4 battery’s capacity in a mobile app.
Use a Solar Charge Controller
Pros: Convenient
Cons: Inaccurate
“My solar charge controller already measures battery voltage. I can just use it to check battery capacity.”
This voltage reading is largely inaccurate. It suffers from all of the problems mentioned above, plus it’s done while the battery is connected to loads and chargers.
(Not to mention that some charge controllers have incorrect voltage readings.)
For example, recall that when I checked my battery’s voltage with a multimeter at the battery terminals, I got a voltage reading of 13.23 volts. That correlates to a roughly 80% state of charge.
But when I connected my battery to an MPPT charge controller, the controller measured 13.0 volts. That correlates to a roughly 30% state of charge — a difference of 50%! Granted, some charge controllers have much more accurate battery voltage readings than others.
After all, voltage drops under load. And a charge controller is a load. If I were to connect a solar panel and start solar charging the battery, its voltage would quickly jump.
Checking battery capacity this way is convenient. But beware that it can be quite inaccurate. I generally use this voltage reading just to make sure my battery isn’t close to being fully discharged.
If you use this method and want to make sure it’s as accurate as possible, you can buy a battery voltage sensor, such as the Renogy Battery Voltage Sensor or Victron Smart Battery Sense. A voltage sensor gives the controller a more accurate voltage reading, especially in solar power systems with long wire runs.
LiFePO4 Voltage FAQ
What is the voltage of a fully charged 12V LiFePO4 battery?
A fully charged 12V LiFePO4 battery will have a charging voltage of around 14.6 volts and a resting voltage of around 13.6 volts.
What is the charging voltage of a 12V LiFePO4 battery?
The charging voltage for 12V LiFePO4 batteries is 14.2 to 14.6 volts. This works out to a charging voltage of 3.55 to 3.65 volts per cell.
Most often, you’ll see LiFePO4 battery chargers and solar charge controllers use a charging voltage of 14.4 volts for 12V lithium batteries.
What is the minimum voltage of a 12V LiFePO4 battery?
The minimum voltage of many 12V LiFePO4 batteries is around 10 volts. The battery’s BMS should detect when the battery voltage falls to around 10 volts and trigger low-voltage cutoff. (Low-voltage cutoff is also called low-voltage disconnect, which you’ll sometimes see abbreviated LVD.)
Note: Some batteries have higher cutoff voltages, such as 10.6V. So the limit in your battery manual may not be exactly 10V.
LiFePO4 batteries in low-voltage cutoff enter a sleep mode to protect the battery cells from over discharge. LFP batteries in sleep mode can have very low voltage readings, usually less than 5 volts. You may think that the battery is dead, but really it’s just sleeping.
Once a battery enters sleep mode, it needs to be woken up. Refer to your battery manual for instructions on how to do this. If your manual doesn’t have instructions, check out our tutorial on how to wake up a sleeping LiFePO4 battery.
What is the float voltage of a 12V LiFePO4 battery?
LiFePO4 batteries don’t need to be float charged because they don’t leak charge the way lead acid batteries do.
If you can, disable float charging on your charge controller or battery charger. If you can’t, prevent the battery from entering float charge by setting the float voltage to that recommended in the battery manual — usually 13.6 volts ± 0.2 volts.
How much can you discharge a LiFePO4 battery?
Many LiFePO4 batteries can discharge 100% of their rated capacity every time with no ill effects.
However, many manufacturers recommend discharging only 80% to maximize battery life. In fact, some brands state the cycle life of their batteries based on 80% depth of discharge (DoD).
For comparison, lead acid batteries can only discharge 50% of their rated capacity. So a 12V 100Ah LFP battery has as much usable capacity as a 12V 200Ah lead acid battery.
LiFePO4 Battery Voltage Charts (12V, 24V 48V)
Just so you know, this page contains affiliate links. If you make a purchase after clicking on one, at no extra cost to you I may earn a small commission.
Here are lithium iron phosphate (LiFePO4) battery voltage charts showing state of charge based on voltage for 12V, 24V and 48V LiFePO4 batteries — as well as 3.2V LiFePO4 cells.
Note: The numbers in these charts are all based on the open circuit voltage (Voc) of a single battery at rest. If your LFP battery manual has its own discharge curve and charging parameters, they should take precedence over the ones below.
V LiFePO4 Battery Voltage Chart
| 14.6V | 100% (charging) |
| 13.6V | 100% (resting) |
| 13.4V | 99% |
| 13.3V | 90% |
| 13.2V | 70% |
| 13.1V | 40% |
| 13.0V | 30% |
| 12.9V | 20% |
| 12.8V | 17% |
| 12.5V | 14% |
| 12.0V | 9% |
| 10.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
12V 100Ah LiFePO4 batteries are currently some of the most popular for off-grid solar power systems. They’re a drop-in replacement for 12V lead acid batteries, and a great upgrade.
They are fully charged at 14.6 volts and fully discharged at 10 volts. They are made by wiring four 3.2V LiFePO4 cells in series.
12V LiFePO4 Battery Charging Parameters
- Charging voltage: 14.2-14.6V
- Float voltage: 13.6V (or disabled)
- Maximum voltage: 14.6V
- Minimum voltage: 10V
- Nominal voltage: 12V or 12.8V
V LiFePO4 Battery Voltage Chart
| 29.2V | 100% (charging) |
| 27.2V | 100% (resting) |
| 26.8V | 99% |
| 26.6V | 90% |
| 26.4V | 70% |
| 26.2V | 40% |
| 26.0V | 30% |
| 25.8V | 20% |
| 25.6V | 17% |
| 25.0V | 14% |
| 24.0V | 9% |
| 20.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
24V lithium iron phosphate batteries are another popular option for DIY solar power projects. You can either buy a 24V LiFePO4 battery off the shelf, or get two identical 12V LiFePO4 batteries and connect them in series to make a 24V battery bank.
They are fully charged at 29.2 volts and fully discharged at 20 volts. They are made by connecting eight 3.2V LiFePO4 cells in series.
24V LiFePO4 Battery Charging Parameters
- Charging voltage: 28.4-29.2V
- Float voltage: 27.2V (or disabled)
- Maximum voltage: 29.2V
- Minimum voltage: 20V
- Nominal voltage: 24V or 25.6V
V LiFePO4 Battery Voltage Chart
| 58.4V | 100% (charging) |
| 54.4V | 100% (resting) |
| 53.6V | 99% |
| 53.2V | 90% |
| 52.8V | 70% |
| 52.4V | 40% |
| 52.0V | 30% |
| 51.6V | 20% |
| 51.2V | 17% |
| 50.0V | 14% |
| 48.0V | 9% |
| 40.0V | 0% |
Here’s a printable version of the above chart:
And here it is graphed out:
48V batteries are more popular for larger solar systems. They rarely make sense for small-scale projects. Designing a higher voltage solar system allows you to keep amperage low, thereby saving you money on wiring and equipment costs.
48V LiFePO4 batteries are fully charged at 58.4 volts and fully discharged at 40 volts. They are made by connecting 16 3.2V LiFePO4 cells in series.
48V LiFePO4 Battery Charging Parameters
- Charging voltage: 56.8-58.4V
- Float voltage: 54.4V (or disabled)
- Maximum voltage: 58.4V
- Minimum voltage: 40V
- Nominal voltage: 48V or 51.2V
.2V LiFePO4 Cell Voltage Chart
Here’s a printable version of the above chart:
And here it is graphed out:
Individual LiFePO4 cells have a nominal voltage of 3.2 volts. They are fully charged at 3.65 volts and fully discharged at 2.5 volts.
You can buy individual LiFePO4 battery cells online. They’re best used for making your own lithium batteries. You can wire cells in series and parallel to make LFP batteries with your desired voltage and capacity combinations.
3.2V LiFePO4 Cell Charging Parameters
- Charging voltage: 3.55-3.65V
- Float voltage: 3.4V (or disabled)
- Maximum voltage: 3.65V
- Minimum voltage: 2.5V
- Nominal voltage: 3.2V
Ways to Check LiFePO4 Battery Capacity
Measure Battery Open Circuit Voltage with a Multimeter
Pros: Moderately accurate
Cons: Must disconnect all loads and chargers and let battery rest
A battery’s voltage changes depending on its charge and discharge rate. Plus, LiFePO4 batteries have a relatively flat discharge curve from around 99% to 20% capacity. Because of these factors, it can be hard to estimate their state of charge from voltage alone.
To get an even somewhat accurate estimate of LiFePO4 battery capacity based on voltage, you first need to disconnect any loads and chargers from the battery. (Don’t forget to disconnect your solar panels from your charge controller first!)
Let the battery rest for a little while — I usually wait 15-30 minutes — and then measure its open circuit voltage with a multimeter.
Compare your measurement to the right voltage curve above, or the state of charge chart in your battery manual. Use it to get a rough estimate of your battery’s remaining capacity.
For example, I own the Ampere Time 12V 100Ah LiFePO4 Deep Cycle Battery (Ampere Time has since rebranded to “LiTime”). I wanted to check its capacity after having stored it for a few weeks. I brought it out of storage and measured its voltage with a multimeter. I got 13.23 volts.
I then compared this number to the 12V LiFePO4 state of charge chart above, as well as the one in the battery manual.
Based on the charts, I’d estimate my battery’s state of charge was somewhere around 80%.
I like this method best for estimating the state of charge of an LFP battery I’ve just received or just pulled out of storage. The battery is already at rest and not connected to anything. I find it too inconvenient to disconnect everything once the battery is in use.
DIY lithium battery builders will also measure the voltage of used (and new) battery cells — such as LFP cells and 18650 lithium batteries — to see which are good and which are duds.
Use a Battery Monitor
Pros: Most accurate, convenient
Cons: Good battery monitors are expensive
The best way to track battery capacity is to connect a good battery monitor — such as the Victron SmartShunt or Victron BMV-712.
Battery monitors track the amount of amp hours consumed to accurately estimate the state of charge. They also display useful system specs such as battery voltage and current. Some connect via Bluetooth to your phone so you can check your LiFePO4 battery’s capacity in a mobile app.
Use a Solar Charge Controller
Pros: Convenient
Cons: Inaccurate
“My solar charge controller already measures battery voltage. I can just use it to check battery capacity.”
This voltage reading is largely inaccurate. It suffers from all of the problems mentioned above, plus it’s done while the battery is connected to loads and chargers.
(Not to mention that some charge controllers have incorrect voltage readings.)
For example, recall that when I checked my battery’s voltage with a multimeter at the battery terminals, I got a voltage reading of 13.23 volts. That correlates to a roughly 80% state of charge.
But when I connected my battery to an MPPT charge controller, the controller measured 13.0 volts. That correlates to a roughly 30% state of charge — a difference of 50%! Granted, some charge controllers have much more accurate battery voltage readings than others.
After all, voltage drops under load. And a charge controller is a load. If I were to connect a solar panel and start solar charging the battery, its voltage would quickly jump.
Checking battery capacity this way is convenient. But beware that it can be quite inaccurate. I generally use this voltage reading just to make sure my battery isn’t close to being fully discharged.
If you use this method and want to make sure it’s as accurate as possible, you can buy a battery voltage sensor, such as the Renogy Battery Voltage Sensor or Victron Smart Battery Sense. A voltage sensor gives the controller a more accurate voltage reading, especially in solar power systems with long wire runs.
LiFePO4 Voltage FAQ
What is the voltage of a fully charged 12V LiFePO4 battery?
A fully charged 12V LiFePO4 battery will have a charging voltage of around 14.6 volts and a resting voltage of around 13.6 volts.
What is the charging voltage of a 12V LiFePO4 battery?
The charging voltage for 12V LiFePO4 batteries is 14.2 to 14.6 volts. This works out to a charging voltage of 3.55 to 3.65 volts per cell.
Most often, you’ll see LiFePO4 battery chargers and solar charge controllers use a charging voltage of 14.4 volts for 12V lithium batteries.
What is the minimum voltage of a 12V LiFePO4 battery?
The minimum voltage of many 12V LiFePO4 batteries is around 10 volts. The battery’s BMS should detect when the battery voltage falls to around 10 volts and trigger low-voltage cutoff. (Low-voltage cutoff is also called low-voltage disconnect, which you’ll sometimes see abbreviated LVD.)
Note: Some batteries have higher cutoff voltages, such as 10.6V. So the limit in your battery manual may not be exactly 10V.
LiFePO4 batteries in low-voltage cutoff enter a sleep mode to protect the battery cells from over discharge. LFP batteries in sleep mode can have very low voltage readings, usually less than 5 volts. You may think that the battery is dead, but really it’s just sleeping.
Once a battery enters sleep mode, it needs to be woken up. Refer to your battery manual for instructions on how to do this. If your manual doesn’t have instructions, check out our tutorial on how to wake up a sleeping LiFePO4 battery.
What is the float voltage of a 12V LiFePO4 battery?
LiFePO4 batteries don’t need to be float charged because they don’t leak charge the way lead acid batteries do.
If you can, disable float charging on your charge controller or battery charger. If you can’t, prevent the battery from entering float charge by setting the float voltage to that recommended in the battery manual — usually 13.6 volts ± 0.2 volts.
How much can you discharge a LiFePO4 battery?
Many LiFePO4 batteries can discharge 100% of their rated capacity every time with no ill effects.
However, many manufacturers recommend discharging only 80% to maximize battery life. In fact, some brands state the cycle life of their batteries based on 80% depth of discharge (DoD).
For comparison, lead acid batteries can only discharge 50% of their rated capacity. So a 12V 100Ah LFP battery has as much usable capacity as a 12V 200Ah lead acid battery.