V 100Ah LiFePO4 Lithium Iron Phosphate Battery
All Orders Processed in 48 hours or less! Free, Lifetime After-Sale Support! Free Shipping on All Orders! 30 Day Money Back Guarantee!
California Based Support
Call 800-831-9889 to speak with our representatives.
Phone Hours: Mon-Fri 9am-5pm PST or Order Online Now!
California residents: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
,000 Cycles. LiFePO4. 10 Year Lifespan.
RICH SOLAR 12V lithium battery has a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety and packed with power in a small and lightweight footprint. Easily uses the same space as your existing 12V battery and replaces lead acid, AGM or Gel battery applications in RVs, boats, commercial vehicles, off grid back up power and much more. Not intended to replace starting batteries.
- Extremely high number of charge/discharge cycles
- 10 Year lifespan with proper maintenance
- Built-in Smart battery management system
- Wide operating temperature range
- Unsurpassed high temperature performance
- Green energy without metal contaminant
- Low maintenance
- High amp capacity
- Stable output voltage
- Little self-discharge
- Over charging or discharging protection.
- Over current short circuit protection.
- High low temperature disconnects
- Charge Voltage: 14.6V
- Max Charge Current: 50 A
- Max Discharge Current: 100 A
- Battery Dimensions: 12.8″L x 6.6″W x 8.5″H
- Weight: 21.8 lb
BMS Safety Protection
- Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely
- Convenient removable carry handle
- Lightweight
- Short circuit protected
- Physical damage to battery case will not cause fire
- Excessive thermal exposure will not cause a fire
- Able to withstand over-charge/over-discharge without damage to the battery
- Sophisticated Battery Management System (BMS)
BMS Operation
Over charge detection voltage: | 3.9 /- 0.05V |
Over charge detection delay time: | 0.96 – 1.4s |
Over charge release voltage: | 3.80 /-0.05V |
Maximum charge voltage: | 3.65 /-0.05V |
Over discharge detection voltage: | 2.0V /- 0.05V |
Over discharge detection delay time: | 115-173ms |
Over discharge release voltage: | 2.3V /- 0.10V |
Over Current Protection Over current detection delay time: | 9 /- 2ms |
Over current release condition: | Cut load |
Polarity Reverse Protection: Yes
Short Circuit Protection: Yes
3 Year Manufacturer Defect
Shipping Delivery
Our Shipping Policy was last updated on June 27, 2022
Interpretation and Definitions

The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural.
For the purposes of this Disclaimer:
Company (referred to as either the Company, We, Us or Our in this Disclaimer) refers to RICH SOLAR. Goods refers to the items offered for sale on the Service. Orders means a request by You to purchase Goods from Us. Service refers to the Website. Website refers to RICHSOLAR.COM, accessible from RICHSOLAR.COM. You means the individual accessing the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable.
Thank you for visiting and shopping at RICHSOLAR.COM. The following terms and conditions constitute our Shipping Policy.
Domestic Shipping Policy
Shipment processing times
All Orders are processed within 1-2 business days. Orders are not shipped or delivered on weekends or holidays.
If We are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of Your Order, We will contact You via email or telephone.Shipping rates delivery estimates
Shipping charges for Your Orders will be calculated and displayed at checkout.
Shipping method: FedEx GroundShipment cost: FreeEstimated delivery time: 2-5 business days
Shipping method: FedEx Two DaysShipment cost: Depend on productsEstimated delivery time: 2 business days
Shipping method: FedEx StandardShipment cost: Depend on productsEstimated delivery time: 1-2 business days
Overnight delivery is only available for Orders with delivery addresses within the continental United States.
Delivery delays can occasionally occur.

Shipment to P.O. boxes or APO/FPO addresses
RICHSOLAR.COM does not ship to addresses within the U.S., U.S. Territories, and APO/FPO/DPO addresses.
Shipment confirmation Order tracking
You will receive a Shipment Confirmation Email once Your Order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Customs, Duties and Taxes
RICHSOLAR.COM is not responsible for any customs and taxes applied to Your Order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes)
RICHSOLAR.COM is not liable for any products damaged or lost during shipping. If You received Your Order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim.
If you have any questions about this Shipping Policy, You can contact Us:
By visiting this page on our website: richsolar.com/contactBy sending us an email: support@richsolar.com
v 100ah Lithium Ion Lifepo4 Battery
OSM100-4S 12v 100ah lithium battery is built with lithium iron phosphate prismatic LiFePO4 cells. 6,000 recharge cycles (roughly 8 year lifespan at daily use) vs. 500 for other lithium batteries or lead acid. It is a perfect deep cycle lifepo4 lithium battery pack.
V 100AH Overview
OSM 12v 100ah made by 4S2P LiFePo4 battery cells This pack is rated with 100ah lithium iron phosphate battery inside. OSM100-4S lithium ion battery 12v 100ah is different with battle born or expert-power 12v. Inside by 4S2P prismatic LiFePO4 cells. 6,000 recharge cycles (roughly 8 year lifespan at daily use) vs. 500 for other lithium batteries or lead acid. It is a perfect drop in lead acid replacement battery pack. Lifepo4 12v 100ah battery is one of the best rechargeable deep cycle lithium iron phosphate battery.
Besides 100amp hour. OSM provide 12v 200Ah also. Click to learn more.
Smart BMS PROTECTION
OSM100-4S lifepo4 battery 12v 100ah battery Contains a circuit that handles cell balancing, low voltage cutoff, high voltage cutoff, short circuit protection and high temperature protection for increased performance and longer life.
APPLICATIONS
OSM 12v 100ah lifepo4 battery pack is perfect for deep-cycle applications including electric vehicles, solar/wind energy system, UPS battery backup, telecommunication systems, medical equipment, and more
We are Original rechargeable 100ah lithium iron phosphate battery Factory in China Focus On LiFePO4 Battery Solutions, Welcome to contact us If You Have Individual Pricing for Large Scale Projects. OSM support OEM for this same model.
V 100AH Wall-mounted LiFePO4 Solar Lithium Battery Pack
Wall-mounted lithium battery packs are energy storage devices that can be mounted onto a wall for easy installation and use. These battery packs are usually composed of lithium-ion batteries, which allow for high energy density and long-lasting performance.
Simple Appearence
The design of Wall-mounted lithium battery packs is simple and compact, to fit the need of being mounted onto a wall. They are usually a small rectangular or square box, with some sockets and buttons on the edge for device connection and operation control.
Safe and Reliable
The battery uses a new lithium iron phosphate high-quality cell, more stable performance, higher energy density, and lower safety risks.
Intelligent BMS System
Intelligent BMS System is a sophisticated battery management and protection system that is integrated into Wall-mounted lithium battery packs.
Wall-mounted lithium battery packs are mostly used for home energy storage or businesses, and other buildings. Providing an efficient and reliable source of electricity during power outages or peak demand periods.
Application
Lithium batteries can be widely used for solar/wind energy storage, small UPS power supply, and home energy storage.
BSLBATT 100Ah Slim Lithium Battery 12V
You don’t have to carry a bulky, heavy battery to power your camping adventures anymore. Meet BSLBATT 12V 100Ah LiFePO4 Lithium Battery, BSLBATT’s slimmest lithium battery for sale. You’d easily spot this one because of its ultra-slim design but don’t let it fool you—this battery pack is built to provide you with a reliable and steady power source for all your travelling needs.
Product Specification:
- MOQ: 10pcs
- Delivery time: 20-30 working days
- Dimensions 27060065MM
- Case Material Strong aluminum enclosure
- Payment methods : L/C, D/P,T/T, PayPal, Western Union
- Port: Guangzhou/Shenzhen
BSLBATT 100Ah Slim Lithium batteries 12V are an alternative replacement for any application currently using a Deep Cycle Gel, AGM, or Flooded Lead Acid Battery. 100A Continuous Discharge | Maintenance-free, Modular
100Ah Slim Lithium battery 12V is becoming more and more popular for anyone who relies on batteries to run the appliances in a motorhome, caravan, special vehicle, or boat. At BSLBATT Lithium, we have a choice of lithium batteries to cater to just about any requirement. Our range includes models from 20Ah to 500Ah, covering most applications.
The BSLBATT Lithium 12Volt 100Ah Slim Line Lithium Battery is the ideal choice for 4WDer’s wanting a reliable, robust, and quality source of power to run portable fridges/freezers, LED lights, and phone chargers. Its quick re-charge and constant voltage make it perfect for 4WDer’s in search of dependable power when 240v power is unavailable.
It can be charged by any AGM battery charger that does not use an “equalization or de-sulphation” mode. These chargers in the AGM setting of 14.4V-14.6V should charge the battery to 95% quickly. They can get the battery to 99% but this last 3-4% will take longer than using a dedicated Lithium Charger.
BSLBATT Chinese 100Ah Slim Lithium battery 12V is the ultimate in deep-cycle battery technology delivering unrivaled performance and product life span. Chinese most advanced state-of-the-art Battery Management System (BMS) inbuilt ensures peace of mind when it comes to battery protection and safety.
Lighter Weight: Up to 1/3 the weight of traditional AGM batteries
Faster Recharge: 5x faster recharge times than AGM’s
Longer Life Cycle: Up to 4000 cycles at 80% depth of discharge
Extremely Low Self-Discharge Rate: Less than 3% self-discharging
Purposely Built: for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks
Built-in Battery Management System: Controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection
Proven Parallel Ability: Use in parallel to increase your capacity for longer storage
High Discharge Rate: holds voltage under high discharge
Flat Discharge Curve: longer run time and more efficient
Safety: LiFePO4 is the safest and most stable of all lithium chemistries reducing associated risks
Quality guaranteed:5 Years Warranty and 20 Years Designed service life
Product Characteristics
Items | Parameter |
Battery Type | 100Ah Slim Lithium batteries 12V |
Nominal Voltage | 12.8V |
Nominal Capacity | 100Ah |
Energy | 1280WH |
Dimensions (L x W x H) | (27060065)mm |
Weight | 15 kg |
Internal Resistance Fully Charged @25℃ | ≤10mOhms |
Thermal Management | Nature cooling |
Mounting orientation: | Horizontal or vertical |
Case Material | Strong aluminum enclosure |
Certifications | CE/ISO/UN38.3/MSDS |
Efficiency | 99% |
Self Discharge | |
Series Parallel Application | max. 6 series or 6 parallel connected application |
Recommended float charge voltage: | Less than or equal to 62.5A |
Allowed max charge current: | 100A |
Output voltage range: | 10.0 – 14.6V |
Operating Humidity | 60±25%R.H. |
Max continuous discharge current: | 100A |
Pulse discharge current: | 200A (3s) |
Discharge cut-off voltage: | 10V |
Discharge Temperature | -4 to 140 ºF (-20 to 60 ºC) |
Charge Temperature | 32 to 113 ºF (0 to 45 ºC) |
Storage Temperature | 23 to 95 ºF (-5 to 35 ºC) |
Life at 100% DoD (depth of discharge): | more than 4000 cycles |
Self-Discharge Rate | Residual capacity: ≤3%/month; ≤15%/years |
Reversible capacity: ≤1.5%/month; ≤8%/years | |
Storage Temperature Humidity Range | Less than 1 month:.20℃~35℃, 45%RH~75%RH |
Less than 3 months:.10℃~35℃, 45%RH~75%RH | |
Recommended storage environment: 15℃~35℃,45%RH~75%RH |
Lithium v AGM Capacities:
(Based on the standard depth of discharge for both Lithium (80%) and AGM (50%).
The12v 100ah slimline lithium battery Difference
Deep cycle batteries may appear similar on the outside but don’t be fooled, there are key differences between low-quality offerings often found on online auction sites and 12v 100ah slimline lithium battery premium quality offerings.
Fits where other batteries cant
Suited for custom installations our 12v 100ah slimline lithium battery can fit where others simply can’t. Designed to fit where other batteries can, the 12v 100ah slimline lithium battery is the ideal solution to mount behind seats, in canopies, or behind draws.
Built-in Volt Meter
The 12v 100ah slimline lithium battery features an LCD screen on the top of the battery to allow you to easily see your battery level of charge at any point in time. The screen is backlit to allow for ease of use whether it’s day or night.
Twin 120A Anderson Style Connectors
The 12v 100ah slimline lithium battery is equipped with twin 120A Anderson Style Connectors. Both of these can be used for high current charging and discharging. This also allows the battery to be easily removed and relocated if being used in different applications.
Please note that the batteries are equipped with grey plugs not blue as seen in the picture.
Included Mounting Brackets
The 12v 100ah slimline lithium battery comes complete with an assortment of straight and right-angle mounting brackets and screws to allow for easy fitment. Unlike other solutions on the market, our slimline batteries have existing mounting points so there is no need to drill out rivets to install the brackets.
INTERNAL STRUCTURE:
BSLBATT caring every detail of the lithium battery pack to assure you get the safest and durable battery using experience:
Dual Safe BMS, Steel Plate on Top Screw Supported Overhead | Tailored Qualified Cable for Fast Charging and Discharging |
Main Export Markets:
Asia/Australasia Central/South America/Eastern Europe/Mid East/Africa North America/Western Europe
How to Build an Ice Fishing Battery Box with Lithium Batteries
Ice fishing can be fun, and it’s even better with a fish finder to help pinpoint those elusive fish swimming under the ice. But most fish finders require a power source, which can be challenging to find when you’re in the middle of a lake unless you bring a power source with you. An ice fishing battery box is one way to power your fish finder in any location.
Here’s an in-depth look at what an ice fishing battery box is, how you can make your own, and other uses it can have. So, let’s get started.
What is an Ice Fishing Battery Box?
An ice fishing battery box is an enclosed container with a heavy-duty battery inside. In this case, it would be relegated for your fish finder, but you could potentially use it for other things.
The enclosed container, usually plastic, keeps the battery safe from water or other hazards during transport. The box typically has ports to draw power from the battery for other devices and charge the battery.
Why Should You Use Lithium Batteries When Ice Fishing
Temperature is the primary concern for batteries in an ice fishing battery box, as all batteries diminish in power when running in colder temperatures. But, when compared to a lead-acid battery’s capacity, lithium batteries deplete at a slower rate and can deliver higher amp-hours. As evidenced by this example, lithium batteries can be superior to lead-acid batteries in many situations.
Plus, newer lithium batteries contain a battery management system (BMS) that stops the battery from charging when its internal temperature dips below 32 degrees. The BMS is an advantage because charging a battery under freezing temperatures can cause permanent and irreversible damage. Ultimately, a battery without a BMS may run for slightly longer in colder temperatures, but you run the risk of damaging your ice fishing battery box for good.
Heated lithium batteries are another advanced feature worth pursuing. They use “a proprietary, low draw technology to keep your battery warm and ready to charge.” This technology is especially beneficial in colder temperatures and allows the lithium battery to continue safely running regardless of inclement weather.
We recommend our 12V 50ah Battle Born Lithium Battery for your ice fishing box project.
How to Build a DIY Ice Fishing Battery Box
Although you can purchase a battery box online, you can also build your own ice fishing battery box. All you need are a few materials, a battery (of course), and some electrical wiring know-how.
Gather Your Materials
Here are the main components you’ll need to build your ice fishing battery box: a box, a battery, switches, and basic wiring items such as two colors of wires and an assortment of electrical connectors. The container can be anything that’s airtight and has a lid that’s simple to put on and remove. Many people use ammo boxes because they’re durable and waterproof.
Binding posts are also helpful, as they can charge the battery while it’s inside the box. A voltmeter and chagrin ports are also an excellent addition to the box. Some people choose to go as far as installing a shunt inside the box to accurately read the actual charge left in the battery. Typically, you can find USB charging ports and your standard 12V output socket (also known as an old car cigarette lighter port). You can usually find the voltmeter, USB ports, and cigarette output socket online in a single unit.
Put It All Together
First, drill all the holes you’ll need for the different components in your box. Then, after securing each piece and placing the battery inside the box, wire all the parts together. Basic knowledge of wiring will be useful, but you can also find pre-wired components if you don’t feel confident.

Finally, when everything is in the box and correctly wired, you can charge the battery, connect the fish finder, and start enjoying your new ice fishing battery box.
How Much Does It Cost to Put Together a DIY Ice Fishing Battery Box?
of components and the overall cost can depend on what items you purchase for constructing the box and how you choose to do it. Overall, estimated for an ice fishing battery box range between 60 and 100 if you purchase the pieces separately and make it yourself.
But, there are also companies like Ice Hole Power and Bold North Outdoors that sell complete kits. They range from 80 to 250 for either the kits or completed boxes.
What Else Can You Use an Ice Fishing Battery Box For?
You can use an ice fishing battery box for more than just ice fishing. You can wire and mount lights to the side so that your battery box becomes a light source. These lights can even include multiple colors or a flashing option, making it an efficient and exciting way for friends to find you in the dark.
You can also use the many available ports to power or charge many things. When you’re away from civilization, having a charging port for multiple tools is invaluable.
100Ah 12V LiFePO4 Deep Cycle Battery
100Ah 12V GC2 LiFePO4 Deep Cycle Battery
270Ah 12V LiFePO4 Deep Cycle GC3 Battery
MultiPlus-II 12/3000/120-50 2x120V
Rich Solar 200W 12V Panel